renova
renova

Oil

renova

Oil

The range of Oil, provided by us, includes Base Oil - SN500 & BS150, Fuel Oil - Fuel Oil - 380 & CST180, and Gasoil - Automotive Gasoil. The Oil, which we offer, is sourced from the most trusted manufacturing companies that use best quality materials to process it. The Oil finds great application in a large number of industries. The Oil is duly tested on various parameters to ensure its precise chemical composition, perfect fluidity and effective nature.

Specifications(Fuel Oil - 380 & CST180)

Analysis Unit Limit Test Method
Density @@ 15oC kg/m3 990 max ASTM D 1298
Viscosity Knematic @@ 50 °C c.St 380 max ASTM D 445
Pour Point oC 32 max ASTM D 97
Flash Point oC 65 min ASTM D 93
Sulphur Total wt% 3.5 max ASTM D 1552
Carbon Residue (conradson) wt% 15 max ASTM D 189
Ash wt% 0.15 max ASTM D 482
Water & Sediment vol% 1 max ASTM D 1792
Calorfic Value (higher) mj/Kg 41.7 min Calculated
Test Result Maximum
Density @@ 15 Co 0.97 0.99%
Kin Viscosity @@ 50 Co, Cst 180 230
Flash Point (P.M.C.C) 65 co 75
Pour Point 21 co 25
Total Sulphur 3.8 4
Ash Content 0.05 0.08
Water & Sediment 1 1.5
Water Content % 0.5 1
Carbon Residue Conradson 8.5 10
Vanadium 70 80
Aluminium + Silicon 80 90

Specifications(Base Oil - SN500 & BS150)

SpGr @@ 60/60 F (App.) 0.886
Flash Point C (min) 220
Asphaltenes Wt% (max) 0.06
KIN.VIS. @@ 100 C (min) 11
Water Cont.vol % (max) 0.02
Color (max) 3
Four Point C (max) -3
Viscosity Index (min) 88.9

Specifications(Automotive Gasoil)

Test Limits Test Method
ASTM D IP
Density at 20 oC. Kg/m3 0.820-0.870 D1298 160
Flash PMCC oC. Min. 60 D93 34
Sulphur content % m/m. Max. 0.5 D1552 336
Cloud point oC, max 12 - -
Cold Filter plugging Point (CFPP) oC, max. 6 309
Cetabe Index (calculated), min. 48 D976 -
Water, % v/v, max. 0.05 D95 74/82
Distillation
Recovery @@365oC. % v/v, min
End Point oC, max
90400 D86 123
Kinematic Viscosity at 40 oC, cSt; Min, Max 1.65.5 D445 71
ASTM Colour, max 3.5 D1500 196
Copper strip corrosion, 3 hrs. At 100oC max. 1 D130 154
Sediment %m/m. max 0.01 D473 53
Ashes % m/m max. 0.01 D482 4
Strong Acid No. Mg KOH/g Nil D974 139
Total Acid No. Mg KOH/g 0.5 D974 139
Carbon residue conradson on 10% residue, %m/m. Max. 0.15 D189 13
renova

Bitumen

renova

Bitumen

Bitumen is provided during the process of oxidation of vacuum bottom (the bitumen production feedstock that derives from distillation tower residue in vacuum oil refineries) at bitumen production units.

Specifications(40/50)

SPECIFICATION 40/50 TEST METHOD
Specific Gravity @@ 25/25˚C 1.01-1.06 ASTM D70
Penetration @@ 25˚C 40-50 ASTM D5
Ductility @@ 25˚C 100 Min ASTM D113
Softening Point °C 52/60 ASTM D36
Loss On Heating (WT)% 0.2 Max ASTM D6
Drop-in Penetration After Heating % 20 Max ASTM D6 & ASTM D5
Flash Point °C 250 Min ASTM D92
Solubility in Cs2 (WT)% 99.5 Min ASTM D4
Spot Test Negative A.A.S.H.O.T 102

Specifications(60/70)

SPECIFICATION 60/70 TEST METHOD
Specific Gravity @@ 25/25˚C 1.01-1.06 ASTM D70
Penetration @@ 25˚C 60-70 ASTM D5
Ductility @@ 25˚C 100 Min ASTM D113
Softening Point °C 49-56 ASTM D36
Loss On Heating (WT)% 0.2 Max ASTM D6
Drop-in Penetration After Heating % 20 Max ASTM D6 & ASTM D5
Flash Point °C 250°C Min ASTM D92
Solubility in Cs2 (WT)% 99.5 Min ASTM D4
Spot Test Negative A.A.S.H.O.T 102

Specifications(80/100)

SPECIFICATION 80/100 TEST METHOD
Specific Gravity @@ 25/25˚C 1.00-1.05 ASTM D70
Penetration @@ 25˚C 80-100 ASTM D5
Ductility @@ 25˚C 100 Min ASTM D113
Softening Point °C 42-52 ASTM D36
Loss On Heating (WT)% 0.5 Max ASTM D6
Drop-in Penetration After Heating % 20 Max ASTM D6 & ASTM D5
Flash Point °C >225°C ASTM D92
Solubility in Cs2 (WT)% 99.5 Min ASTM D4
Spot Test Negative A.A.S.H.O.T 102

Specifications(85/100)

SPECIFICATION 85/100 TEST METHOD
Specific Gravity @@ 25/25˚C 1.01-1.06 ASTM D70
Penetration @@ 25˚C 60-70 ASTM D5
Ductility @@ 25˚C 100 Min ASTM D113
Softening Point °C 49-56 ASTM D36
Loss On Heating (WT)% 0.2 Max ASTM D6
Drop-in Penetration After Heating % 20 Max ASTM D6 & ASTM D5
Flash Point °C 250°C Min ASTM D92
Solubility in Cs2 (WT)% 99.5 Min ASTM D4
Spot Test Negative A.A.S.H.O.T 102
renova

Petrochemicals

renova

Petrochemicals

Sulphur Powder

We are a renowned Exporter & Supplier of premium quality Sulphur Powder. We procure Sulphur Powder from the reputed refineries of Middleast, Iraq and Russia. Sulphur Powder made available by us is catering to the needs of various industries such as Fertilizers, detergent, pesticides etc. We offer Sulphur Powder at reasonable prices.

Urea - Granule & Prilled

The company is well-known as a prominent Urea - Granule & Prilled Exporter and Supplier. The Urea - Granule & Prilled, offered by us, is procured from the certified sources in the industry. Our Urea - Granule & Prilled is high in quality and thus highly demanded amidst the worldwide clients.

Specifications(PVC)

Polyvinyl chloride, commonly abbreviated PVC, is a thermoplastic polymer. It is a vinyl polymer constructed of repeating vinyl groups (ethenyls) having one hydrogen replaced by chloride. Polyvinyl chloride is the third most widely produced plastic, after polyethylene and polypropylene. PVC is widely used in construction because it is cheap, durable, and easy to assemble.



Specifications(HDPE)

High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum (in terms of energy and raw materials) to make one kilogram of HDPE. HDPE is commonly recycled, and has the number "2" as its recycling symbol.

Specifications(LDPE – LLDPE)

Linear low-density polyethylene (LLDPE) is a substantially linear polymer (polyethylene), with significant numbers of short branches, commonly made by copolymerization of ethylene with longer-chain olefins. Linear low-density polyethylene differs structurally from conventional low-density polyethylene (LDPE) because of the absence of long chain branching.

Specifications(LDPE)

is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, plastic bags for computer components, and various molded laboratory equipment. Its most common use is in plastic bags.

LLDPE has penetrated almost all traditional markets for polyethylene; it is used for plastic bags and sheets (where it allows using lower thickness than comparable LDPE), plastic wrap, stretch wrap, pouches, toys, covers, lids, pipes, buckets and containers, covering of cables, geomembranes, and mainly flexible tubing

Specifications(PET)

Polyethylene Terephthalate, commonly abbreviated as PET, PETE, or the obsolete PETP or PET-P, is a thermoplastic polymer resin of the polyester family and is used in synthetic fibers; beverage, food and other liquid containers; thermoforming applications; and engineering resins often in combination with glass fiber.

renova

Paraffin Wax

renova

Paraffin Wax

paraffin wax, colourless or white, somewhat translucent, hard wax consisting of a mixture of solid straight-chain hydrocarbons ranging in melting point from about 48° to 66° C (120° to 150° F). Paraffin wax is obtained from petroleum by dewaxing light lubricating oil stocks. It is used in candles, wax paper, polishes, cosmetics, and electrical insulators. It assists in extracting perfumes from flowers, forms a base for medical ointments, and supplies a waterproof coating for wood. In wood and paper matches, it helps to ignite the matchstick by supplying an easily vaporized hydrocarbon fuel.

Specifications(L2 Grade)

SPECIFICATION RESULT TEST METHOD
OIL CONTENT %Wt 2 ASTM D-721
MELTING POINT Co 58-61 ASTM D-87
COLOUR WHITE  
KINEMATIC VISCOSITY AT 100 oC cSt 3-5< ASTM D-445
DENSITY AT 15 oC kg/m3 810-830 ASTM D-4052
PACKING SLAB FORM IN CARTONS OF 25 +/ 1 KG APPR

Specifications(M2 Grade)

SPECIFICATION RESULT TEST METHOD
OIL CONTENT %Wt 2 ASTM D-721
MELTING POINT Co 62-64 ASTM D-87
COLOUR WHITE  
KINEMATIC VISCOSITY AT 100 oC cSt 4-5 ASTM D-445
DENSITY AT 15 oC kg/m3 810-830 ASTM D-4052
PACKING SLAB FORM IN CARTONS OF 25 +/ 1 KG APPR.

Specifications(H3 Grade)

SPECIFICATION RESULT TEST METHOD
OIL CONTENT %Wt 3 ASTM D-721
CONGELING POINT Co 66-69 ASTM D-87
COLOUR WHITE  
KINEMATIC VISCOSITY AT 100 oC cSt 6.5-8 ASTM D-445
PACKING SLAB FORM IN CARTONS OF 25 +/ 1 KG APPR.

Specifications(H5 Grade)

SPECIFICATION RESULT TEST METHOD
OIL CONTENT %Wt 5 ASTM D-721
CONGELING POINT Co 66-69 ASTM D-87
COLOUR WHITE  
KINEMATIC VISCOSITY AT 100 oC cSt 6.5-8 ASTM D-445
PACKING SLAB FORM IN CARTONS OF 25 +/ 1 KG APPR.
renova

Minerals & Metal

renova

Minerals & Metal

Specifications(Zinc)

The Zinc is available with us in a various grades and range, procured from the certified sources. The assortment of our Zinc comprises of Zinc Ingot 99.995 Grade, Zinc Ingot 99.98 Grade, and Zinc Ingot 99.95 Grade. The Zinc can be availed from us at affordable prices.


• Zinc Ingot 99.995 Grade

• Zinc Ingot 99.98 Grade

• Zinc Ingot 99.95 Grade

Specifications(Lead)

The Lead, offered by us, can be availed in Ingots of various grades. Similarly, the company offers Lead Ingots 99.99 Grade and Lead Ingots 99.986 Grade. The Lead is used in a number of industrial applications in all over the world.


• Lead Ingots 99.99 Grade

• Lead Ingots 99.986 Grade

Specifications(Aluminium)

We are a leading Aluminium Exporter and Supplier based in Dubai. Catering to different requirements, we have in store different grades of Aluminium such as Aluminium SOWS Purity 99.7and Aluminium Ingot 99.9. Stringently inspected by our quality inspectors.


• Aluminium SOWS Purity 99.7

• Aluminium Ingot 99.9

renova

Contact

Sales@ShaniaGT.com

Info@ShaniaGT.com

Dubai U.A.E P.O.Box 32312

 

Name must not be empty
Please provide a valid email
Message should not be empty